Dimastech the company that symbolises the word ‘quality’ are about to release a series of thumbscrews, aimed at the custom case market. For those whom are not familiar with Dimastech, they produce wonderful ‘Bench-tables’ for he avid enthusiast or those whom write for review sites. A review of the Dimasech ‘Hard 2.5 bench table can be found here.
Overclocker’s techs were contacted by Andrea at the aforementioned company to inform us of their new custom case screws. These come in two differing sizes M3 and 6-32 Inch threads. The thumbscrews come in a range of colours from the regular black and silver to red green and blue. We at overclocker’s tech will assume that the 6/32 will be the most utilised as all cases for the enthusiasts use 6/32 inch threads.
Judging by the following photographs they look to be of a very good quality. Note these screws are anodised steel rather than of aluminium. The reason for this is that steel is much more robust and is a much better material and aluminium in this case (pardon the pun)
 Dimastech Black Thumbscrews |
 Loose Thumbscrews |
 Dimastech Silver Thumbscrews |
 Loose Silver Thumbscrews |
As has been previously mentioned, Dimastech also do other colours, for those ‘special customised cases’
 Dimastech Red/Pink Thumbscrews |
 Lose Red/Pink Thumbscrews |
 Blue Dimastech Thumbscrews |
 Blue Loose Thumbscrews |
Finally we have green
 Dimastech Green Thumbscrews |
 Loose Green Thumbscrews |
For those whom actually prefer aluminium over the zinc/steel they have that option as well.
For more information see http://www.dimastech.it
